Check your Welcome Email from EarnLearn to see which courses you need to book. Choose a provider from the list below and follow their booking instructions; either click the link provided or call directly. If calling, be sure to mention you’re an EarnLearn apprentice so the course is billed correctly.
When booking, enter your National Student Number (NSN) carefully to ensure your credits are added to your NZQA record. Please note: if you don’t attend a booked course, you’ll be responsible for paying for the next one.
Trade qualifications that require the completion of this course:
If your First Aid certificate is current and listed on your NZQA Record of Learning, you don’t need to repeat the course.
If you only have 6401 & 6402 but your programme also requires 6400, talk to your training provider about bridging options.
Certificates are valid for 2 years. If yours is out of date, you’ll need to complete the full course again (not just a refresher).
After 2 years, your employer decides whether you attend a refresher course. Please note: EarnLearn doesn’t cover this cost.
We recommend doing your First Aid training within the first three months of your apprenticeship, and before you take on Height Safety or Confined Spaces courses.
The course you will book depends on the programme you are doing:
Electrical: Choose an Essential First Aid course (unit standards 6401 and 6402)
Plumbing, Drainlaying & Gasfitting: Choose a Comprehensive First Aid course (unit standards 6400, 6401, and 6402)
Scaffolding (Level 4 Apprenticeship only): Choose a Comprehensive First Aid course (unit standards 6400, 6401, and 6402)
Courses with New Zealand Red Cross must be booked online. A separate booking is required for each person attending.
Please note these points for booking a course then click the link below:
All bookings are made online by clicking here, then click register.
If you need to change or cancel your booking, or if you have any difficulty booking, please email firstaid@redcross.org.nz or call 0800 RED CROSS and ask for first aid.
Red Cross’ policy on cancellations and refunds can be found here: Information for course participants | New Zealand Red Cross
The course you will book depends on the programme you are doing:
Electrical: Choose a First Aid Level 1 course (unit standards 6401 and 6402)
Plumbing, Drainlaying & Gasfitting: Choose a First Aid Level 2 course (unit standards 6400, 6401, and 6402)
Scaffolding (Level 4 Apprenticeship only): Choose a First Aid Level 2 course (unit standards 6400, 6401, and 6402)
When booking you must:
Click here to book a course online.
If you just need unit standard 6400, you can do this at St John only if you do it within three months of completing the St John First Aid Level One course. If you meet this criteria, please contact St John to book on:
Please note that all other bookings must be made online by clicking the link here and cannot be made over the phone.
Make sure you have the right dates as we cannot get refunds from St John. To change the date of your booking, please see how here. Please do not just make another booking.
Please note, you can reschedule your booked course for free up to 5 days before the course. However, you must ensure you attend within 3 months or you will incur the cost.
The course you will book depends on the programme you are doing:
Electrical: Choose a Workplace First Aid course (unit standards 6401 and 6402)
Plumbing, Drainlaying & Gasfitting: Choose a Workplace First Aid Advanced course (unit standards 6400, 6401, and 6402)
Scaffolding (Level 4 Apprenticeship only): Choose a Workplace First Aid Advanced course (unit standards 6400, 6401, and 6402)
Training Locations: South Auckland and North Auckland
Course Duration: 1 day in person for Basic First Aid and, 1 day in person, plus up to 4 hours of pre-learning online for Advanced First Aid
Booking Options:
Online Booking Step-by-Step Guide:
Already Achieved US6401 and US6402?
If you only need the additional 6400 unit standard, please contact us at 0800 333 899 or info@besafetraining.co.nz to book.
For help with booking or if you have any questions, contact BeSafe:
Trade qualifications that require the completion of this course:
If you already hold Height Safety units 23229 and 15757 when you begin your apprenticeship, you do not need to complete the training again.
Even if you already hold the units, your employer may decide they want you to do the Height Safety course again.
EarnLearn does not cover the cost of refresher training. Either you or your employer will need to pay.
Book your Height Safety training with one of the approved providers listed below.
The course you need to book is: Working at Heights
This course will give you the unit standards required for your programme – 23229 and 15757
Training Locations: South Auckland and North Auckland
Course Duration: 1.5 days
Booking Options:
Online Booking Step-by-Step Guide:
For help with booking or if you have any questions, contact BeSafe:
The course you need to book is Height Safety Advanced. This 2-day course will give you the unit standards required for your programme – 23229 and 15757.
When booking please note your address in the booking form or your employer’s address, so that your Go Safe card can be sent to you when you complete the training.
To make a booking for Height Safety Advanced check out the available dates and book online here.
Please note: When filling in the booking information in the Attendees Information section you must add ‘charge to EarnLearn’ in the box titled ‘Comments/Any Health issues or learning difficulties’.
You can also book by contacting Safety’n Action direct. Remember to note that EarnLearn should be charged.
Email: sales@safetynaction.co.nz
Phone: 0800 222 388 or 021 578 977.
The course you need to book is Height Safety Intermediate. This 2-day course will give you the unit standards required for your programme – 23229 and 15757.
The following information must be provided when booking:
Under Company Contact Details:
Please ensure you put EarnLearn as the Account Number, so you do not get invoiced.
Click here to book online or contact NZ Safety Blackwoods via email or phone.
Email: training@nzsafetyblackwoods.co.nz
Phone: 0800 967 572
This course is required for apprentices in Plumbing, Gasfitting & Drainlaying.
You must complete a Confined Spaces course that includes unit standards 18426 and 17599.
If these units are already listed on your NZQA Record of Learning, you don’t need to repeat the course.
The course you need to book is Working in a Confined Space.
This course will give you the unit standards required for your programme – 18426 and 17599
Training Locations: South Auckland, North Auckland, and Online
Course Duration: 1 day (Available in-person or online)
If you choose to complete this course online, you will need to submit completed documentation for a confined space entry. This can be from a real entry you have participated in or one of the scenarios provided in the course. Four specific documents must be completed, or you can submit equivalent forms from your workplace for assessment.
Booking Options:
Online Booking Step-by-Step Guide:
For help with booking or if you have any questions, contact BeSafe:
The course you need to book is Confined Spaces and Gas Detection. This 2-day course will give you the unit standards required for your programme – 18426 and 17599.
When booking please note your address in the booking form or your employer’s address, so that your Go Safe card can be sent to you when you complete the training.
To make a booking for Confined Spaces and Gas Detection check out the available dates and book online here.
Please note: When filling in the booking information in the Attendees Information section you must add ‘charge to EarnLearn’ in the box titled ‘Comments/Any Health issues or learning difficulties’.
You can also book by contacting Safety’n Action direct. Remember to note that EarnLearn should be charged.
Email: sales@safetynaction.co.nz
Phone: 0800 222 388 or 021 578 977
The course you need to book is Confined Spaces Intermediate. This 2-day course will give you the unit standards required for your programme – 18426 and 17599.
The following information must be provided when booking:
Under Company Contact Details:
Please ensure you put EarnLearn as the Account Number, so you do not get invoiced.
Click here to book online or contact NZ Safety Blackwoods via email or phone.
Email: training@nzsafetyblackwoods.co.nz
Phone: 0800 967 572
0800 327 648 (0800 EARN IT)
Monday - Friday, 8:30am - 5pm
If you’re overseas, please phone
+64 09 9051748
EarnLearn is part of Te Pūkenga – New Zealand Institute of Skills and Technology. Learn More
Learn with purpose Explore Te Pūkenga
Copyright © 2025 Te Pūkenga